15
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
11. TECHNICAL SPECIFICATIONS
Type: Manual turntable
Drive-method: Belt-drive
Motor: DC-motor
Speed: 33 1/3 RPM and 45 RPM
Change-time between the speeds:
33 -> 45 RPM in < 1 sec.
45 -> 33 RPM in < 5 sec.
Pitch adjustment: ± 10 % via fader
Initial torque: > 650 g/cm
Wow & Flutter: < 0.25 % WRMS
Start time: < 1 sec.
Brake: via belt
Stop time: < 1 sec.
Rumble: 50 dB DIN B
Platter: Outer diameter 320 mm
Weight 682 g
Tonearm: S-shape with Cardan’s suspension
Tonearm-length: 234 mm
Overhang: 20 mm
Adjustable stylus-pressure: 0-4 g
Anti-Skating-range: 0-7 g
Power supply: 230 V/50 Hz
115 V/60 Hz
Maximum starting-current: 260 mA
Power consumption: 8 W
Connectors: 1 6.3-mm-remote-start-jack
Dimensions: 450 x 352 x 148 mm
Weight: 9 kg
Please note: Every information is subject to change without prior notice. 11/00 ©
To Previous Page
Loading...
