10
OPERATING INSTRUCTIONS
®
BD-1520/1550
Belt-drive Turntable
For your own safety, please read this user manual carefully
before you initial start-up.
All persons involved in the installation, operation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual
1. INTRODUCTION
Thank you for having chosen an OMNITRONIC BD-1520/1550 turntable. If you follow the instructions given
in this manual, we can assure you that you will enjoy this device for many years.
Unpack your BD-1520/1550.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.
1.1 Features
Belt-drive DJ-turntable
With professional belt-drive • Delivery includes high-quality pick-up system qualified for back-cueing •
Adjustable +/- 10 % speed control • Large Start/Stop-button • Instant start due to a powerful motor; short stop
time via belt • Remote start possible via ¼”-connection on the rear panel • Strobe lamp for exact speed
adjustment • Target lamp • Delivery includes removable dustcover • Adjustable anti-skating • Shock-absor-
bing feet
2. SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
To Next Page
Need help?
General
