EasyManua.ls Logo

Omnitronic CM-5300 - Product Overview; Overview of all features

Omnitronic CM-5300
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Product Overview
16
The CM-5300 is a high-grade stereo mixer with an extensive feature set for clubs and numerous mobile PA
applications. The 3 microphone channels have a one-knob compressor, adjustable talkover function and a 3-band
EQ. the 5 stereo channels come with gain controls, individual VU meters, 3-band kill EQs, 100mm dual-rail faders
and assignable crossfader. Channel 1 can be used for FOH signals, channel 6 features a 3.5mm AUX input. The
stereo and mono output sections have their own level meters, trimmers for adjusting the maximum output level
and electronically balanced XLR connectors. In addition, a subwoofer output with built-in active crossover is
provided. The mixer can be used as a table-top unit or installed in a rack.
Overview of all features
●
High-grade stereo mixer for clubs and numerous mobile PA applications
●
5 stereo input channels with gain control, 3-band kill EQ (+12/-26dB) and 10-digit LED level meter
●
Front panel aux input
●
Rear stereo input FOH for stage mixers
●
Smooth dual-rail channel input faders (60 mm/100 mm)
●
3 microphone input channels with front combo connector
●
Gain control, peak LED, 3-band EQ and “on air” switch per microphone channel
●
One-knob compressor per microphone channel
●
2-parameter adjustable auto talkover for automatic music level reduction when microphone is used
●
Fully assignable smooth dual-rail crossfader (45 mm)
●
Master section with two separately controllable stereo outputs, output 2 switchable to mono
●
10-digit stereo LED level meter, switchable between both master outputs
●
Balanced XLR and unbalanced main outputs
●
Additional mono zone output (with switchable 80Hz HPF) which can be routed to the master bus or channel 5
●
10-digit LED level meter for the zone output
●
Mono subwoofer output with integrated active crossover (frequency/level adjustable)
●
All outputs with rear-side maximum level setting controls
●
Adjustable effects send/return path, assignable to mic or master bus
●
PFL section with PFL/master mix control and cue mix/split option
●
Record output, independent of the master
●
Rack installation, 7 U