Need help?Do you have a question about the Omnitronic trm-202 mk2 and is the answer not in the manual?
General| Type | DJ Mixer |
|---|---|
| Channels | 2 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 80 dB |
| Total Harmonic Distortion | < 0.05 % |
| Input Types | Line, Phono |
| Outputs | Master, Booth, Record |
| Output Types | RCA |
| EQ | 3-band |
| Faders | Crossfader, Channel Faders |
| Power Supply | AC 100-240V, 50/60 Hz |
| Microphone input | 1 x XLR/Jack combo |
Crucial safety warnings, including handling voltage, transport damage, power connection, temperature, and cleaning guidelines.
Specifies voltage, indoor use only, ambient temperature range, humidity, altitude, and installation precautions.
Details the master level meter, CLIP LEDs, and Bass, Mid, High frequency isolator controls.
Describes tone controls, CUE button, CLIP LED, input selector, and volume control for channel 1.
Describes tone controls, CUE button, CLIP LED, input selector, and volume control for channel 2.
Details master, booth, headphone volume controls, power indicator, and microphone input/volume.
Explains controls for headphone monitoring modes (split cue) and signal selection.
Details RCA and XLR inputs/outputs for phono, line, mic, master, booth, and record connections.
Describes the 6.3mm headphone jack and the power unit input.
Lists power supply, consumption, inputs (LINE, PHONO, MIC), outputs (MASTER, BOOTH, REC), and headphone jack details.
Details frequency isolator ranges (Lows, Mids, Highs), overall frequency range, dimensions, and weight.
To Next Page