00043864.DOC, Version 1.1
32/32
E-1300
P
ower supply: 115/230 V AC, 50/60 Hz ~
Power consumption: 690 W (1/8 power)
Power output sine:
stereo 4 :
2 x 650 W
stereo 8 :
2 x 350 W
8 bridged:
1 x 1300 W
Frequency range: 10-50,000 Hz, ± 1.5 dB
Damping factor: >350
Distortion factor: 0.1 %
Slew rate: 45 V/[s
S/N ratio: >100 dB
Channel seperation: >70 dB/ 1 kHz
Input sensitivity: 0.77 V
Input voltage: max. 21 dBV/9V
Input impedance:
21 k
Input connectors: 2 x XLR, 2 x 6.3 mm jack
Output connectors: 2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals
Control elements: power switch, level control per channel, mode switch (stereo/bridged),
limiter selector, groundlift selector
LED indicators: stereo, bridged (globally)
protect, and 7-fold output meter with clip LED (per channel)
Protection circuits: short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction: steel chassis with aluminum front panel
Dimensions (DxWxH): 375 x 482 x 100 mm (19", 2 U)
Weight: 14 kg
Please note: Every information is subject to change without prior notice. 18.06.2010 ©
To Previous Page
Loading...
Need help?
General
