10451130_V_2_1.DOC
15/34
OPERATING INSTRUCTIONS
P-series power amplifiers
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
For your own safety, please read this user manual carefully
before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- include every supplementay update with the original manual
INTRODUCTION
Thank you for having chosen an OMNITRONIC power amplifier. If you follow the instructions given in this
manual, we can assure you that you will enjoy this device for many years.
Unpack your amplifier.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.
Features
Powerful amplifier
Enormous power with highest brilliance • 2 gain-controls on the frontpanel • All operation-modes controllable
via LEDs • LED-intensity adjustable via brightness control on the rear panel • Signal-inputs via XLR-female
or 1/4"-jack-socket • Speaker connection via lockable Speakon-plugs or Banana/screw combination • Ground
Lift-switch against humming • Bridged-switch for bridging • Many protection-circuits for optimized equipment-
protection • Very rugged housing • 19" dimensions • High power/weight-relation
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
To Next Page
Need help?
General
