Omnitronic P-1000 User Manual

© Copyright
Nachdruck verboten!
Reproduction prohibited!
Réproduction interdit!
Für weiteren Gebrauch aufbewahren!
Keep this manual for future needs!
Gardez ce mode d’emploi pour des
utilisations ultérieures!
BEDIENUNGSANLEITUNG
USER'S MANUAL
MODE D'EMPLOI
P-SERIES
Professional amplifiers

Omnitronic P-1000 Specifications

General

Type	Power amplifier
Channels	2
Output Power (4 Ohms)	2 x 500W
Frequency Response	20Hz - 20kHz
Input Impedance	20k Ohms
S/N Ratio	> 100dB
THD	< 0.1%
Cooling	Fan Cooled
Connectors Input	XLR, RCA
Connectors Output	Speakon, Binding Posts
Impedance	4-8 Ohms
Protection Circuits	Short circuit, Overheat, Overload, DC voltage
Power Supply	230V, 50/60Hz

Summary

Introduction and Safety Guide

Essential Safety Instructions

Crucial safety precautions for operating the OMNITRONIC power amplifier correctly and safely.

Operating Determinations and Precautions

Device Description: Frontpanel

Frontpanel Controls and Indicators

Explanation of front panel controls, buttons, and LED indicators.

Rear Panel, Legal Info & Hearing Protection

Rear Panel Connections and Controls

Description of rear panel input/output connectors and controls.

Installation and Input Setup

Input Connection Details

Output and Cable Specifications

Output Connection Options

System Configuration

Switch Adjustments and Mains Connection

Operation Modes: Stereo and Impedance

Amplifier Operation

Parallel and Bridged Operation

Basic Operation and LED Indicators

Step-by-step guide to operating the amplifier and understanding LED status.

Troubleshooting and Maintenance

Problem Chart and Solutions

Technical Specifications: P-125, P-250, P-500

Technical Specifications: P-1000, P-1500, P-2000

Technical Specifications: P-3500