OMP Hobby M2 Evo - Assembly Step 1: Main Rotor Components; Main Rotor Holder Assembly Guide

step 1 步骤一
!
󱊹󰛠
CAUTION
󱄳󰥹󳕅󰡐󰿻󳕅󰈯󳺯󲸝󱍙󲗨󰓋󳅿󱆠 󳒋󰅫󰳰󰺑󰶶󰳅󰤳󴂩󰮜󲗍
󳔽󳗰󳺯󲸝󰯇󳇈󲓺󱶾󰅫󰳰󰺑󰶶󳍰󰭁󱸿󳺯󲸝󰅚
󰿻󳕅󳙐󳳘
 Ø2.95xØ5.95x2.9mm)x2
󳕅󰡐󳴳󰓑󰳮
󱄳󰥹󳕅󰡐 -Ø3xØ6x2.8mm
󰮜󲗍󰑸
󳕅󰡐󲸽
Ø3xØ4.4x1.4mm
󳕅󰡐
Ø3xØ6x2.5mm
(OUT)
󰕕󳕔󰇠
󰕕󳕔
(IN)
󱄳󰥹󳕅󰡐 (Ø3xØ6x2.8)
󰮜󲗍󰑸
!
󱊹󰛠
CAUTION
󲺖󲒕󲺖󰅝󰟡󱆠一󱃲󳺯󲸝󳇈󱸿󳅵󲶋󰰀󰏃󲛇󰵏
󳕅󰡐 (Ø3xØ6x2.5mm)x4
󳕅󰡐󲸽  Ø3xØ4.4x1.4mm)x2
󰿻󳕅󳕅󰡐󱠘 (Ø4.2xØ6x0.1mm)x2
󱄳󰥹󳕅󰡐 (Ø3xØ6x2.8mm)x2
!
󱊹󰛠
CAUTION
󱠘 (Ø3.1xØ4.5x0.6mm)x2
󱠘  Ø2xØ5x0.2mm)x2
Grease
Grease
6
EN
WWW.OMPHOBBY.COM
󰿻󳕅󳕅󰡐󱠘 (Ø4.2xØ6x0.1mm)
󲾣󲶋 (M2x6mm)x2
!
󱊹󰛠
CAUTION
󳪭󳰇󲃀󳴳󰳮󳕅󰡐󰮊
Bearing-MR63ZZ
Washer
Spindle bearing spacer
Thrust bearingF3-6M
Obverse of bearing faces inside.
Thrust braring and washer for radial bearing are wear items,and thus should be
inspected for replacement after every 20 flights.
For flights with high headspeed ,the inspection interval should be reduced to
ensure flight safety.
Thrust bearing0FM-6M
Spindle bearing spacer
Main rotor holder
Washer
Bearing-MR63ZZ
Washer
Socket screw
Damper rubber-red
Washer
Pay attention to the direction
of the copper washer
Thrust bearing
󳕅󰡐
Ø3xØ6x2.5mm
Bearing-MR63ZZ
󰷂󲾣󲶋
M2x4mm
Socket screw
Washer
󱠘
Ø2xØ5x0.2mm
󱠘 Ø3.1xØ4.5x0.6mm
Washer
Grease
󰿻󳕅󳙐󳳘
Ø2.95xØ5.95x2.9mm
Damper rubber
󰿻󳕅 Ø3x38.8mm
Feathering shaft
󳞢󰈯󰮜󲗍󰅫󰑸
Metal main rotor housing
After the feathering shaft screw is locked, please note that the rotor holder can
rotate smoothly