Need help?Do you have a question about the OMP Hobby OMPHOBBY and is the answer not in the manual?
Instructions for installing the motor, including screws and aluminum columns.
Steps to attach the ESC to its holder and secure wires with fastening straps.
Guides the installation of the cowl, propeller, and spinner, focusing on alignment.
Details on installing the landing gear plate, carbon fiber gear, and cover plates.
Instructions for securing the tail wheel bracket to the vertical tail frame with screws.
Steps to connect the elevator servo extension cable and secure the servo in the fuselage.
Instructions for preparing the horizontal tail slot and making initial cuts for installation.
Instructions for preparing the vertical tail slot and installing control horns and hinges.
Guides on installing the aileron servo, connecting wires, and securing the servo arm.
To Next Page
General
