OMPHOBBY EDGE 540 - Page 7

ZhuhaiEdgeSmartDriveTechnologyCo.,Ltd.
www.omphobby.com
ControlHornsAssembly
4. Applyepoxyinsidethepre‐cutslots,andcoatthehornswith
epoxyasshown.
5. Fitthehornsintothelockingplateandtheninsertthemintothe
pre‐cutslots.Aligntherightandleftsidesbeforetheepoxy
cures.Wipeawayexcessepoxywithrubbingalcohol.