Omron C200H Series User Manual

(5) Select PLC on the menu bar and then click Edit - Memory to display below dialog. Transfer the PLC memory
(Data Memory: D and Holding Relay: HR) after selecting the transfer data. Click the Transfer to PLC button.
(6) Make the CX-Programmer offline.
󲨩󲨪

Omron C200H Series Specifications

General

Humidity	10% to 90% RH (non-condensing)
Programming Language	Ladder Diagram, Instruction List
Communication Ports	RS-232C, RS-422/485
Operating Temperature	0 to 55°C (32 to 131°F)
Mounting	DIN rail
Type	Programmable Logic Controller (PLC)
Power Supply	100 to 240 VAC, 24 VDC