12
(4) Select Work Online from the PLC Menu to go online.
(5) Transfer the ladder program, PLC settings, and I/O table. (Select Transfer - From PLC from the PLC Menu.)
Click the OK Button to start transfer.
(6) Transfer the PLC memory data (Data Memory). (Select Edit - Memory from the PLC Menu.)
Scroll and select all the areas. Click the Transfer from PLC Button to start transfer.
(7) Select Work Online from the PLC Menu to go offline.
(8) Save the program with a new project name. (Select Save As from the File Menu.)
To Next Page
Loading...
