EasyManua.ls Logo

Omron Comp A-I-R NE-C801KD - Preparing the Nebulizer for Use; Connecting the AC Adapter

Omron Comp A-I-R NE-C801KD
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
EN
2. Preparing the nebulizer for use
Warning:
Clean and disinfect the nebulizer kit, kids accessory, mask, mouthpiece or nosepiece before
using them when as follows:
- the first time after purchase.
- if the device has not been used for a long period of time
- if more than one person uses the same device
For directions on cleaning and disinfecting refer to Section 4 (page 16-18).
Note: Make sure that the air filter is changed regularly. Refer to Section 6 “Changing the air filter” (page
20).
2.1 Connecting AC adapter
1. Make sure that the power switch is turned off.
Check that the power switch is in the off ( ) position.
2. Insert the power plug of the AC
adapter into the power connector
on the compressor.
3. Plug the AC adapter into a power
outlet.
Note: When disconnecting the AC
adapter, unplug the AC adapter
from the power outlet before
removing the power connector
on the compressor.
Power Plug
Power Connector
Power Outlet
Operating instructions
NE-C801S-KDAP(V)_A_M.book Page 11 Tuesday, July 23, 2013 12:23 PM

Related product manuals