12
2. Preparing the nebulizer for use
2.2 Adding medication and assembling the parts
1. Remove the mask or mouthpiece, kids accessory and
cap from the nebulizer kit.
2. Remove the inhalation top from the medication tank.
1) Rotate the inhalation top anti-clockwise.
2) Lift the inhalation top out of the medication tank.
3. Add the correct amount of prescribed medication to
the medication tank.
Caution:
The capacity of the medication tank is 2 to 7 ml.
Note: Scales on the nebulizer kit are for reference only. The
scale on the outside of the tank is with no vaporizer
head in place. Please use the scale on your syringe or
vial for accurate measurement of medication.
4. Make sure that the vaporizer head is securely
attached to the inhalation top.
5. Put the inhalation top back inside the medication
tank.
1) Align the protrusion on the inhalation top with the
indent on the medication tank, as shown.
2) Rotate the inhalation top clockwise and align with
the medication tank until they click in place.
NE-C801S-KDAP(V)_A_M.book Page 12 Tuesday, July 23, 2013 12:23 PM
To Next Page
Loading...
Need help?
General
