OMRON ELECTRONICS LTD ● Technical Support: 0870 752 0871 or visit www.myOMRON.com
27
From the left-hand window, click LeanCP1L[CP1L] Offline to highlight it (as shown
below).
Having done this, you will notice that the small yellow triangle symbol on the top icon bar
turns from grey to yellow (as shown circled in red below). This is the Work Online
shortcut (also available from the PLC menu).
Clicking on this connects CX-Programmer to the PLC…
Click Yes to connect.
From the top-level PLC menu, select Transfer > To PLC. Ensure that all boxes are
‘checked’ (as shown below), then click OK…
You will be asked if you wish to continue; click Yes…
To Next Page
Loading...
