OMRON ELECTRONICS LTD ● Technical Support: 0870 752 0871 or visit www.myOMRON.com
9
Wiring the MX2 inverter option:
Your MX2 inverters will have been supplied with an appropriate RFI footprint filter, AX-
FIM101-RE.
Before wiring the MX2 inverter, please refer to the “Precautions for Safe Use” section of
the User’s Manual, ref: I570-E2-01
(see Resource CD > TECHNICAL DOCUMENTATION > MX2
INVERTER)
It is not necessary to connect a motor to the MX2 inverter whilst testing ‘on the bench’.
However, if a motor is connected, please refer to the wiring instructions in section 2-3-12
and earthing/EMC recommendations in section D-1-2
to motor
(if used)
from filter
captive cables
230VAC
MAINS
SUPPLY
To Next Page
Loading...
