CS/CJ Series HOST Link Driver
GP-Pro EX Device/PLC Connection Manual
38
8 Error Messages
Error messages are displayed on the screen of Display as follows: "No. : Device Name: Error Message (Error
Occurrence Area)". Each description is shown below.
Display Examples of Error Messages
"RHAA035: PLC1: Error has been responded for device write command (Error Code: 2 [02])"
Item Description
No. Error No.
Device Name
Name of External Device where error occurs. Name of External Device is a title of
External Device set with GP-Pro EX. (Initial value [PLC1])
Error Message Displays messages related to the error which occurs.
Error Occurrence Area
Displays IP address or device address of External Device where error occurs, or error codes
received from External Device.
• Received error codes are displayed such as "Decimal [Hex]".
• IP address is displayed such as "IP address (Decimal): MAC address (Hex)".
• Please refer to the manual of External Device for more detail of received error codes.
To Previous Page
Loading...
Need help?
General
