Technical data
This device fulfills the provisions of the EC directive 93/42/EEC (Medical Device Directive) and the European
Standard EN13544-1:2001, Respiratory therapy equipment - Part1: Nebulizing systems and their components.
Type: OMRON CX3 (NE-C16)
Dimensions: 180 (W) x 110 (H) x 290 (D) mm.
Weight: approx. 2.3 kg
Nebulisation rate: 0.25* ml/min average
Particle size (MMAD**): 3.8 µm (also refer to particle size distribution curve)
OUTPUT: 0.28 ml
OUTPUT RATE: 0.06 ml/min
Max. A-weighted sound pressure level: 58 dB
Minimum recommended fill volume: 2 ml
Max. air flow: 10 l/m
Max. air pressure: 2.5 bar (250 kPa)
Capacity of medication tank: 6 ml
Operating conditions: Temperature: 10° C ~ 40° C
Humidity: 10% ~ 95% RH
Storage conditions: Temperature: -25° C ~ 70° C
Humidity: 10% ~ 95% RH
Supply voltage: AC 230 V, 50 Hz
Power consumption: Less than 100 W
Electrical safety: Fuse T2.5A/250V, Class 2, Type B
Contents of the package: Compressor unit, nebuliser kit, air tube, 5 spare filters,
instruction manual, guarantee card
* value measured with 0.9% NaCl solution.
Please note that specifications may vary with medication type used.
**MMAD = Mean Mass Aerosol Diameter
CX3 particle size distribution curve
Optional accessories/spare parts:
Nebuliser kit (including mouthpiece, medication tank, nebuliser cap, air tube), order no. = MJD
Air filter (set = 5 pcs), order no. = 8403
Flexible adult mask, order no. = MAF
Flexible child mask, order no. = MPF
Subject to technical modification without prior notice.
English
9
To Next Page
Loading...
Need help?
General
