10
How to use nebulizer kit
1. Make sure that the power switch is in the off (
SRVLWLRQ
2. Plug the power plug into a power outlet.
3. Remove the inhalation top from the medication tank.
1) Rotate the inhalation top anti-clockwise
2) Lift the inhalation top out from the medication tank.
4. Add the correct amount of prescribed
medication into the medication tank.
5. Verify the presence of the vaporiser head
inside the medication tank.
6. &KRRVHWKHDSSURSULDWHLQKDODWLRQWRSE\UHDGLQJWKH³8VHU
*XLGDQFH´
7RSXWWKHLQKDODWLRQWRSEDFNRQWRWKHPHGLFDWLRQWDQN
1) Lower the inhalation top onto the medication tank.
2) Rotate the inhalation top clockwise.
7. $WWDFKWKH%DE\PDVNRU
mouthpiece to the nebulizer
kit tightly.
8. Attach the air tube. While twisting the air tube
SOXJVOLJKWO\SXVKLWILUPO\LQWRWKHDLUWXEH
connector.
1
2
0HGLFDWLRQ7DQN
Vaporiser Head
1
2