Name: Omron NE-C801
Brand: Omron
Rating: 4 (1 reviews)

Questions and Answers:

A
Alex LopezJul 29, 2025
What to do if my Omron NE-C801 Respiratory Product is not nebulizing well?
- G
  Gregg PorterJul 30, 2025
  If your Omron Respiratory Product has a low nebulization rate, several factors could be responsible: * Ensure the medication tank has the correct amount of medication. * Verify the vaporizer head and nebulizer kit are correctly assembled. * Check for any blockages in the nozzle or air tube. * Make sure the nebulizer kit isn't tilted more than 45 degrees. * Confirm the air tube is properly connected to both the compressor and nebulizer kit and is free of kinks. * Replace the air filter if it's dirty.
E
ellen91Aug 3, 2025
What to do if my Omron Respiratory Product has no nebulization or low nebulization rate?
- E
  Eric DonovanAug 3, 2025
  If your Omron Respiratory Product isn't producing any mist or the mist rate is low, check the following: Ensure the correct amount of medication is in the medication tank. Make sure the vaporiser head is correctly attached, and the nebulizer kit is properly assembled. Verify the nozzle and air tube are free of blockages and that the air tube isn't kinked. Confirm the air tube is correctly connected to both the compressor and nebulizer kit. If the air filter is dirty, replace it with a new one. Also, ensure the nebulizer kit isn't tilted more than 45 degrees.
J
Jacqueline CoxAug 7, 2025
Why is my Omron NE-C801 Respiratory Product getting so hot?
- D
  Dylan WallaceAug 7, 2025
  Your Omron Respiratory Product may overheat if the compressor is covered during use; ensure it's uncovered. Also, limit continuous use to 20 minutes, with a 40-minute interval before the next use.
K
katrinahudsonAug 11, 2025
What to do if my Omron NE-C801 is too loud?
- B
  Breanna WeaverAug 11, 2025
  If your Omron Respiratory Product is making excessive noise, ensure that the air filter cover is correctly attached.

Omron NE-C801 Specifications

General

Type	Compressor Nebulizer
Nebulization Rate	Approximately 0.3 ml/min
Power Supply	AC 50/60Hz
Weight	Approx. 270 g (without accessories)
Residual Volume	Approx. 0.7 ml
Operating Conditions	Temperature: 10-40°C, Humidity: 30 to 85% RH
Particle Size	MMAD approximately 3.0 µm
Dimensions	Approx. 142 mm (W) × 72 mm (H) × 98 mm (D)