Omron G3PA Series User Manual

132
Power Solid-state Relay
G3PA-(VD)
Extremely Thin Relays Integrated with
Heat Sink
Downsizing achieved through optimum design of
heat sink.
Mounting possible via screws or via DIN rail.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Conforms to VDE 0160 (finger protection), with a
dielectric strength of 4,000 V between input and
load.
Conforms to VDE 0805, IEC 950.
Approved by UL, CSA, and VDE.
RCW
Ordering Information
Model Isolation Zero cross function Indicator Applicable output load Rated input voltage
G3PA-210B-VD
Phototriac
l
Yes Yes
10 A at 24 to 240 V AC
5 to 24 VDC
G3PA-220B-VD
oo ac
coupler
es
es
20 A at 24 to 240 V AC
5o C
G3PA-240B-VD 40 A at 24 to 240 V AC
G3PA-260B-VD 60 A at 24 to 240 V AC
G3PA-210BL-VD
No
10 A at 24 to 240 V AC
G3PA-220BL-VD
o
20 A at 24 to 240 V AC
G3PA-240BL-VD 40 A at 24 to 240 V AC
G3PA-260BL-VD 60 A at 24 to 240 V AC
G3PA-210B-VD
Yes
10 A at 24 to 240 V AC
24 V AC
G3PA-220B-VD
es
20 A at 24 to 240 V AC
C
G3PA-240B-VD 40 A at 24 to 240 V AC
G3PA-260B-VD 60 A at 24 to 240 V AC
G3PA-420B-VD 20 A at 180 to 400 V AC
12 to 24 VDC
G3PA-430B-VD 30 A at 180 to 400 V AC
oC
G3PA-420B-VD-2 20 A at 200 to 480 V AC
G3PA-430B-VD-2 30 A at 200 to 480 V AC
G3PA-450B-VD-2 50 A at 200 to 480 V AC

Omron G3PA Series Specifications

General

Series	G3PA
Type	Solid State Relay
Operating Temperature	-30 to 80 °C
Ambient Operating Temperature	-30 to 80 °C
Output Type	AC
Load Current	10 A
Rated Load Current	10 A
Max. Switching Voltage	264 VAC
Max. Switching Current	10 A
Isolation Voltage	4000 VAC
Dielectric Strength	4, 000 VAC
Mounting	DIN rail or screw
Mounting Type	DIN Rail
Release Time	0.5 ms max
Vibration Resistance	10 to 55 Hz
Load Voltage Range	75 to 264 VAC
Load Voltage	75 to 264 VAC