Omron H3YN - Page 11

Solid-state Timer H3YN B-95
Timers
Flush Mounting Adapter
Socket Mounting Plates
The PYP-1 is a Socket Mounting Plate for a single Socket and the PYP-18 is a Socket Mounting Plate for 18 Sockets. The PYP-18 can be cut
appropriately according to the number of Sockets to be used.
Hold-down Clips
The Hold-down Clip makes it possible to mount the H3YN securely and prevent the H3YN from falling out due to vibration or shock.
33.5
27.1
48.5
31.5
25.1
3
3
5
25.2
+0.2
−0
31.6
+0.2
−0
R0.5 max.
Panel Cutout
Y92F-78
Note: 1. Push the H3Y in until the Adaptor (Y92F-
78) hooks engage with its rear panel.
2. Do not round the corners of the cutout on
the rear panel surface, otherwise the
Adaptor (Y92F-78) tabs may not engage
properly.
Panel thickness
1 to 3 mm
t = 1.6
49
28
t = 1.6
42±0.1
49
492
17 x 27.4 = 465.8±0.6
13.1
21.6
4.5
3.4
27.4±0.15
PYP-1
Two, 3.4-dia. holes
Square hole
PYP-18
72, elliptic holes
53
4.5
4.5
1.2
9R
33.7
2.5
20
(84°)
30.5
24.5
5 max.
Y92H-3
Y92H-4
Y92H-3 for
PYF@A Socket
(Set of Two Clips)
Y92H-4 for
PY@ Socket