Omron H7E - Page 29

Self-powered Totalizer New H7E (Common) C-35
Counters
Accessories (Order Separately) (Common)
■ New H7E (Except for PCB-mounting Counter)
The New H7E models are supplied with a mounting bracket (Y92F-34) and nut. Additionally, the Y92F-75/-76/-77B Flush Mounting Adapters shown
here allow the New H7E models to be fitted to existing panel cutouts.
Degree of protection (front): IP40 (not waterproof)
The Y92F-76 adapter can be used. The DIP switch of the H7E@-N
can be operated in mounted condition. Vibration resistance and
shock resistant are the same level as the H7E@-N series.
• The minimum mounting interval is 30 mm.
Note: An interval of 40 mm is recommended for easier wiring.
• Do not allow the ambient temperature of the H7E@-N to exceed the
specifications (55°C).
• Mounting is possible onto panels with a thickness of 1 to 5 mm.
RST
47.
6
2.4
1
8
.
6
4
2
6
×
−
+1.
0
0
22.2
+
0
.
5
0
22.2
+
0
.
5
0
4
5
+
0
.
5
0
30
min
.
Y92F-35 Compact Flush Mountin
g
Bracke
t
Panel
C
utou
t
D
e
n
se
o
u
n
t
i
n
g
Single mounting
28.8 24.2 22.2
45.2
48.2
53.8
4
24.8
48.8
RST
24.238 3850 22.2
27.5
48.2
52.5
60
45.2
4
31 24.2 22.2
45.2
48.2
63
72
4
26
26
45.3
63
Use mounting bracket supplied with the Counter
Panel cutout
Use mounting bracket supplied with the Counter
Panel Cutout
Y92F-75 Flush Mounting Adapter
for 26 × 45.3 Rectangular Cutout
Y92F-77B Flush Mounting Adapter
for 24.8 × 48.8 Rectangular Cutout
(Color: light gray)
Two, M4
Panel Cutout
(Color: light gray)
Use the Y92F-76 together with the Y92F-35 Compact
Flush Mounting Bracket.
(Color: light gray)
Two 4.5 dia . co unt ersun k ho les
Two 3.5 dia. mounting holes
Two, M3
Y92F-76 Flush Mounting Adapter
for 27.5 × 52.5 Rectangular Cutout
Note: The mounting panel
thickness should be
between 1 and 5 mm.