Solid State Relays G3PA J-21
SSR
Solid State Relays
G3PA
Extremely Thin Relays Integrated with Heat
Sinks
• Downsizing achieved through optimum design of heat sink.
• Mounting possible via screws or via DIN track.
• Close mounting possible for linking terminals. (Except for G3PA-
260B-VD and G3PA-450B-VD-2.)
• Applicable with 3-phase loads.
• Replaceable power element cartridges.
• Comply with VDE 0160 (finger protection), with a dielectric
strength of 4,000 V between input and load.
• Comply with VDE 0805, IEC 950.
• Certified by UL, CSA, and VDE (reinforced insulation).
Model Number Structure
■ Model Number Legend
1. Basic Model Name
G3PA: Solid State Relay
2. Rated Load Power Supply Voltage
2: 200 VAC
4: 400 VAC
3. Rated Load Current
10: 10 A
20: 20 A
30: 30 A
40: 40 A
50: 50 A
60: 60 A
4. Terminal Type
B: Screw terminals
5. Zero Cross Function
Blank: Equipped with zero cross function
L: Not equipped with zero cross function
6. Certification
VD: Certified by UL, CSA, and VDE
7. Special Specifications
Blank: Standard models
2: 480-V models
123 4 5 6 7
G3PA-@@@@-@-@
To Next Page
Need help?
General
