11
WARNING
• Clean and disinfect the nebulizer kit, mouthpiece, and optional nosepiece or
optional masks before using them for the first time after purchase.
• If the device has not been used for a long period of time, or if more than one
person uses the same device, clean and disinfect the nebulizer kit, mouthpiece,
and optional nosepiece or optional masks before using them.
CAUTION
Make sure the air filter is clean. If the air filter has changed color or has been
used on average for more than 60 days, replace it with a new one.
For directions on cleaning and disinfecting refer to page 18 - 19.
For directions on changing the air filter refer to page 20.
1 Insert the power plug on the AC adapter into
the power connector on the back side of the
compressor. Plug the AC adapter into the electrical
outlet.
WARNING
Do not plug or unplug the AC adapter into the
electrical outlet with wet hands.
CAUTION
• Do not overload power outlets. Plug the AC adapter
into the appropriate voltage outlet.
• Do not use extension cords. Plug the AC adapter
directly into the electrical outlet.
NOTE: AC adapter can be worked at 100-240V~350mA,50/60Hz.
2 Lift up the mouthpiece and the cap to remove them
from the nebulizer kit.
Electrical Outlet
Power Connector
Power Plug
PREPARING THE NEBULIZER FOR USE
Operating Instructions
To Next Page
Loading...
Need help?
General
