Omron Micro A-I-R NE-U22 User Manual

11
Correct Use of the Unit How to Fill the Medication
5 Install the Medication
Bottle to the Main Unit.
- If the Medication Bottle is not
installed correctly, the power will not
turn on.
- If the Electrodes are extremely
stained, the unit will not nebulize
normally. In that case, wipe off the
stain.
6 Install the Mask Adapter.
7 Install the Inhalation Mask
or the Mouthpiece.
Align both
Electrodes with
each other.
Keep the Electrodes clean.
■ How to install the Inhalation Mask (S)
■ How to install the Mouthpiece
Installation is
complete.
Installation is
complete.
Insert the
Inhalation
Mask as far
as it goes.
Insert the
Mouthpiece
as far as it
goes.
Installation is
complete.
Securely cover the
Main Unit with the
Mask Adapter.
EN-p2-20-(NE-U22)-3 3/25/02 4:48 PM Page 11

Omron Micro A-I-R NE-U22 Specifications

Power

power source	3 VDC (two AA alkaline batteries), 2.4 VDC (two AA nickel-hydrogen batteries)
power consumption	1.5 W

Technical Specifications

ultrasonic frequency	180 kHz
nebulization rate	0.25 ml / minute or more
particle size	5 µm

Capacity and Dimensions

medication bottle capacity	7 ml
external dimensions	38 (W) x 104 (H) x 51 (D) mm
weight	97 g

Battery and Operating Life

battery life with continuous nebulization	4 hours
battery life with daily use	8 days
operating temperature	10 to 40°C