UNIT ASSEMBLY AND USAGE
7
5. Attach one end of the air tubing to the air tubing connector
located on the front of the compressor.
6. Attach the other end of the air tubing to the base of the nebulizer.
7. Attach the mouthpiece or mask to the top section of the nebulizer.
8. With the power switch off, plug the power cord into an
appropriate electrical outlet.
9. Turn the unit on.
10. Begin treatment according to your physician's and/or
respiratory therapist's instructions.
11. When treatment is complete, turn the unit off and unplug unit
from the electrical outlet.
POWER
SWITCH
5
6
7
To Next Page
Loading...
Need help?
General
