16
3.Using the Unit
3.4 Using the Memory Function
This unit has a memory capable of storing 30 sets of readings.
Every time you complete the measurement, the unit
automatically stores blood pressure and pulse rate.
Note: When 30 sets of readings are stored in memory, the
oldest set will be deleted to store a new set.
To View Previous Readings Stored in Memory
1. Press the MEM button to view readings stored in memory
from the most recent to the oldest.
The Memory number appears for a second before the
pulse rate is displayed.
The newest set is numbered “1”.
Press the MEM button repeatedly to cycle through the
readings.
2. Press the O/I START button to
turn the unit off.
Note: If you forget to turn the unit
off, it will automatically shut
itself off after two minutes.
To Next Page
Loading...
Need help?
General
