19
ENEN
5. Handling Errors and Problems
5.1 Error Messages
Error Symbol Cause Correction
Cuff over
inflated.
Repeat measurement.
Remain still and do not move
during measurement. (Refer
to “3.3 Taking a Reading”.)
Movement
during
measurement.
The wrist cuff is
not fastened
securely.
Carefully read and repeat the
steps listed under “3.1
Applying the Wrist Cuff”.
An E mark with
a code/number
indicates the
device has a
hardware
failure.
Consult your OMRON
retail outlet or distributor.
The battery
power is low.
Replace the batteries with
two new “AAA” alkaline
(LR03) batteries.
To Next Page
Loading...
Need help?
General
