2. Preparation
8
Setting the Positioning Indicator
1. Push the button.
2. Push the button to
choose which mode of
Positoning indicator you
wish to have.
While setting the Positioning indicator the blue light flashes.
on1: After the Positioning indicator lights in blue for more than 2 seconds, or in orange
for more than 5 seconds, measurement starts automatically, even though the
monitor is not in proper position.
on2: The Positioning indicator lights in blue for more than 2 seconds, measurement
starts automatically. Measurement will not start if it lights in orange.
oFF: Measurement starts without the Positioning indicator.
3. Push the button to confirm your choice and move
onto the next step.
Note:
If you choose “oFF” for the Positioning indicator, the monitor will skip the process of
choosing which wrist.
HEM-6052-E_B_M_main.book 8 ページ ２０１１年１０月１２日 水曜日 午後２時４７分
To Next Page
Loading...
Need help?
General
