4. Troubleshooting and Maintenance
20
Note:
The irregular heartbeat symbol ( ) may also be displayed with error messages.
The posture has changed during
measurement.
Carefully read and repeat the steps
listed under section 3.3.
Cuff is over inflated.
Carefully read and repeat the steps
listed under section 3.3.
The wrist cuff is not wrapped securely.
Carefully read and repeat the steps
listed under section 3.1.
The user ID has changed during
measurement.
Do not change the user ID during
measurement.
An Er mark with a code/number
indicates the device has a hardware
failure.
Consult your OMRON
retail outlet or distributor.
Error Display Cause Remedy
HEM-6052-E_B_M_main.book 20 ページ ２０１１年１０月１２日 水曜日 午後２時４７分
To Next Page
Loading...
Need help?
General
