Items to Check after Unpacking
28
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Safety Precautions document × 1 copy
• Connectors, mounting screws, mounting brackets, and other accessories other than those in the
table below are not supplied. They must be prepared by the customer.
• The safety bypass connector is required if the safety function is not used. To use the safety function,
provide a separate safety I/O signal connector.
• If any item is missing or a problem is found such as Servo Drive damage, contact the OMRON dealer
or sales office where you purchased your product.
*1 Provide a safety connector separately to use the safety function.
Servo Drive Accessories
Specifications
Connector for main
circuit power supply
terminals and control
circuit power supply
terminals
Connector for External
Regeneration Resistor
connection terminals
and motor connection
terminals
Safety
bypass
connector
Mounting
brackets
Single-phase
100 VAC
100 W Included
Included
*1
–
200 W
400 W
Single-phase/
3-phase
200 VAC
200 W
400 W
750 W
1 kW
1.5 kW
3-phase
400 VAC
600 W
1 kW
1.5 kW
2 kW Included Included
3 kW –
Location of Iron-core Linear Motor Coil Unit Rating Label
To Next Page
Loading...
Need help?
General
