Omron R88D-KN30F-ECT-L User Manual

Appendices
A - 166
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Event name EtherCAT Communications Warning Event code 84B0 0000 hex
Description EtherCAT communications errors occurred one or more times.
Source
EtherCAT Master Function Module
Source
details
Slave Detection
timing
Continuously
Error
attributes
Level
Observation
Recovery
–
Log category
System
Effects User program Continues. Operation Not affected.
Indicators
EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
–––
System
-defined
variables
Variable Data type Name
None – –
Cause and
correction
Assumed cause Correction Prevention
The EtherCAT communications
cable is disconnected or broken.
Connect the EtherCAT
communications cable securely. If
the cable is broken, replace it.
Connect the EtherCAT
communications cable securely.
Noise Take noise countermeasures if
excessive noise is affecting the
EtherCAT communications cable.
Take noise countermeasures if
excessive noise is affecting the
EtherCAT communications cable.
Attached
information
None
Precautions/
Remarks
“B2” is displayed on the front panel of the Servo Drive.

Omron R88D-KN30F-ECT-L Specifications

General

Brand	Omron
Model	R88D-KN30F-ECT-L
Category	Servo Drives
Language	English