Advanced performance…
V/F: 5%
V/F + PG: 0,03%
Voltage Vector Control: 1%
Open Loop Current Vector Control: 0,2%
speed (r/min)
torque (%)
100
50
speed
time
V/F: 5%
V/F + PG: 0,03%
Voltage Vector Control: 1%
Open Loop Current Vector Control: 0,2%
Fast scan cycle
The V1000 employs a dual CPU concept with a CPU device that
is four times faster than those on board previous inverters.
This means a faster-than-ever scan cycle that boosts motor
control performance, especially in current vector control
applications where speed is of the essence.
Accurate speed control
Unlike previous inverters, the V1000 delivers optimum speed
control and high starting torque thanks to the current vector
control. As opposed to other techniques, such as voltage vector
control, current vector control uses the flux current, which is
an actual measurement rather than an estimated value.
Silent operation
A feature of the V1000 that will delight your customers is the
noise-suppression function that decreases motor noise at low
carrier frequencies. This puts machine operators at less risk
to safety hazards and has a positive effect on the general
working ambience.
Speed Fluctuation Rates
Speed Response Accuracy
To Next Page
Loading...
