120
Section 6 Using Communication Diagnostic and the RF Analyzer
RFID System
User's Manual
(Modbus TCP)
Section 6
Functions
4. Select the Enable Option for Communications Diagnostic and click the Set Button.
Refer to Communications Settings View in Section 8 Browser Interface for the setting procedure for the web browser interface.
p.213
When you enable communication diagnostics, the setting will be retained after the Reader/Writer is restarted and
communication diagnostic will remain enabled.
You cannot use communication diagnostics if you are using the FIFO Trigger communications option. Use the once or
auto communications option.
To Next Page
Loading...
