Section 8
Operation Interface
Section 8
Browser Interface
215
RFID System
User's Manual
(Modbus TCP)
RF Tag Communications View
1. Query Area
2. Response
Refer to
RFID System Maintenance
in
Section 6
Functions
for details on communications diagnostics.
p.108
Item name Description Setting range
Reading RF
Tag
Register number Specify in 4-digit hexadecimal the start address for reading data
from the RF Tag.
0000 to 0999 hex
Read data size Specify in 4-digit hexadecimal the number of words of data to
read from the RF Tag.
0001 to 007D hex
Writing RF
Tag
Register number Specify in 4-digit hexadecimal the start address for writing data in
the RF Tag.
0000 to 0999 hex
Data to write Specify the data to write to the RF Tag. 1 to 113 words
Display of query to send Displays the query to send if communications are performed with
an RF Tag. Enter the query directly when you are not
communicating with an RF Tag. If you enter the query directly,
you cannot use a transaction identifier of FFFF hex.
---
Repeat Select this check box to repeatedly and consecutively send the
query.
Clear the selection of this check box if the RF Tag
communications option of the Reader/Writer is set to Auto. If a
query is sent repeatedly and consecutively with the Auto option,
an execution status error will occur.
---
Item name Description
Response Displays the response that was returned from the Reader/Writer.
The background color will be green when the operation will be done normally.
Error code/Diagnosis If the response from the Reader/Writer indicates an error end, the error code and a description
will be displayed in red.
1
2
3
Click this button to send
the query.
Select this check box to
repeatedly send the query.
Displays the query
to send.
To Next Page
Loading...
