Omron V680S-HMD63-ETN - Page 285

RF Tag Installation Precautions
Section 11
Section 11
Appendices
283
RFID System
User's Manual
(Modbus TCP)
 Mutual Interference of RF Tags
If you use more than one RF Tag, separate them by at least the interval shown below to prevent
malfunctions due to mutual interference.
If the distance between the RF tags is too short, read / write distance will be reduced.
 V680S-HMD63-ETN Reader/Writer
 V680S-HMD64-ETN Reader/Writer
54 mm min.
54 mm min.
95 mm min.*
95 mm min.*
90 mm min.
90 mm min.
95 mm min.*
95 mm min.*
* This is required for the V680-D1KP66T-SP exterior dimension (Length: 95 mm).