Omron V680S - Page 6

Embedded Ethernet I/F realizes just one connection to the system without any network converter. Wiring work can be reduced.
Note: Power must be supplied to the Reader/Writer.
Refer to the V680S Series User's Manual
(Cat. No. Z339 or Z353) for details.
Easy Connection
Connect with just one cable via built-in Ethernet
Simple system configuration
Note: Power must be supplied to the Reader/Write
r
One Connection
3 types of industrial Ethernet protocols enable to
connect any type of PLC with easy programming.
Easy Programming
Multiple Reader/Writers can be easily connected by using a Switching HUB. System design and system expansion can be configured easily.
Easy System Expansion
Host Device
g
HUB. System design and s
Ethernet
HUB
Ethernet
The Connection Procedure Manual for OMRON NJ Series
and CJ Series is available.
Plus+
Note : Contact your OMRON sales representative for the Connection Procedure Manual.
Modbus
6