Need help?Do you have a question about the Omron V600 Series and is the answer not in the manual?
General| Operating Frequency | 13.56 MHz |
|---|---|
| Supported Standards | ISO 15693, ISO 18000-3 |
| Read Range | Up to 70 mm (depending on tag and environment) |
| Power Supply | 24 VDC ±10% |
| Operating Temperature | -10 to 55°C (with no icing or condensation) |
| Humidity | 35% to 85% (non-condensing) |
| Communication Interface | RS-232C |
Identifies and explains the purpose of each component of the ID Controller and its ports.
Details environmental requirements, mounting, and installation procedures for the ID Controller.
Explains the procedures for connecting power supply, ground, and I/O terminals for the ID Controller.
Guides users through configuring DIP switches, controller numbers, mode, and terminating resistance.
Explains the SYSWAY protocol, command flow, and the ID Controller's status during operations.
Lists and describes commands for direct interaction with Data Carriers (e.g., READ, WRITE).
Lists and describes commands used by the host device to control the ID Controller's functions.
Details indicator statuses, output states, and types of fatal/non-fatal operation errors.
Provides a comprehensive list of error codes, names, and descriptions for troubleshooting.
To Next Page
