Omron V600 Series User Manual

69
RFID System
Operation Manual
Section 4 Write Command Memory
Section 4
Function
Write Command Memory
A write command executed by the ID Controller is recorded until either the next write command or until
power is reset. The write commands include the WRITE, EXPANSION WRITE, AUTO WRITE, and
POLLING AUTO WRITE commands. The recorded write command can be executed by using the
WRITE PROCESSING REPEAT command.
(Power turned ON)
Write command 1
REPEAT command
Read command 1
REPEAT command
Write command 2
Write command 1
Write command 1
Write command 1
Write command 1
Write command 2
Memory Contents
ID Controller
Operation
Write command 1 executed.
Write command 1 executed.
Write command 1 executed.
Write command 2 executed.
Read command 1 executed.
Operation (Memory initialized)

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C