Omron V600 Series - Other Commands

134
Section 5 Other Commands
RFID System
Operation Manual
Section 5
Communications
Other Commands
Undefined Command Response (IC)
This response is returned when the ID Controller cannot interpret the command code.
■ 1:1 Communications
■ 1:N Communications
Error Response
When an error occurs during communications with the host computer or during communications with a
Data Carrier, an end code is used to indicate the nature of the error.
■ 1:1 Communications
■ 1:N Communications
Response
Command code
IC
2
2
*CR
Terminator
Response
Command code
IC
2
2
*CR
Terminator
2
xx
FCS
3
Controller No.
x
@ x
Response
Command code
xx
xx
22
2
*CR
Terminator
End code
Response
Command code
xx
xx
22
2
*CR
Terminator
End code
2
xx
FCS
3
Controller No.
x
@ x