Omron V600 Series User Manual

125
RFID System
Operation Manual
Section 5 Host Device Commands
Section 5
Communications
Host Device Commands
TEST (TS)
For TEST, the ID Controller returns the test message sent from the host device without any changes.
Use TEST to text communications between the host device and ID Controller.
■ 1:1 Communications
■ 1:N Communications
Test data Any text string for testing communications. Up to 262 characters can be specified.
Test data Any text string for testing communications. Up to 262 characters can be specified.
Command
Command code
TS
xx
x
2
2
*CR
Terminator
x
n
Test data
Response
Command code
TS
xx
x
2
2
*CR
Terminator
x
n
Test data
Command
Command code
TS
xx
x
2
2
*CR
Terminator
x
n
Test data
2
xx
FCS
3
Controller No.
x
@ x
Response
Command code
TS
xx
x
2
2
*CR
Terminator
x
n
Test data
2
xx
FCS
3
Controller No.
x
@ x

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C