Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and we'll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate
app on your smartphone to scan the QR code to the right.
Maintenance
• Replace the rubber protective cap on the side ports after each use.
• Clean the exterior of the tool using a soft damp cloth after use. Do not use abrasive cleaners or
caustic chemicals.
• Lubricate moving parts with vacuum grease as needed. Periodically check the O-rings inside
the connections of each piece. If any are damaged, replace them with identical ones. Test the
air-tightness before use.
• Check the parts of the tool periodically for any wear or damage. Repair or replace any problematic
parts before further use.
• Store in a cool, dry place away from direct sunlight and inaccessible to children.
To Next Page