Need help?Do you have a question about the OMX WorkPro 1000 Series and is the answer not in the manual?
General| Product Type | Office Chair |
|---|---|
| Adjustable Height | Yes |
| Swivel | Yes |
| Tilt Control | Yes |
| Lumbar Support | Yes |
| Armrest Type | Adjustable |
| Weight Capacity | 275 lbs |
| Color | Black |
| Material | Mesh |
Lists all chair components including screws, base, gas lift, and seat parts.
Secure the five casters into the holes on the star base.
Insert the gas lift into the center hole of the star base.
Place the seat cushion unit onto the gas lift and press firmly.
Secure the armrests to the seat cushion using bolts and allen wrench.
Insert the assembled back into the seat mechanism and tighten screws.
Press buttons on arms to move them up or down to the desired height.
Pivot the armrests left or right to change their angle.
Control chair tilt by moving the lever up (lock) or down (unlock).
Use the lever to raise or lower the seat height while seated.
Use the lever to slide the seat forward or backward for depth adjustment.
Turn the knob to increase or decrease the tilt mechanism's resistance.
Defines standard usage limits for commercial seating.
Outlines warranty periods for specific chair materials and components.
Provides instructions for obtaining warranty service and support.
To Next Page
