Deluxe Keyboard Tier
KSA8500
©2018 The Music People On-Stage.com
Note: If using a Z stand, remove plastic end
caps from Z stand. Drill hole in stand to secure
Z stand adapters with screw.
1. Remove plastic end caps from back of
keyboard stand, and adjust width of KSA8500 to
t peg inserts into back of keyboard stand.
Contents in box:
•
Deluxe Keyboard Tier
•
Z stand adapters
2. Insert KSA8500 into back of keyboard stand
and tighten round knobs behind the inserts to
secure KSA8500.
3. Adjust position of arms horizontally using
small cat’s eye knobs on back and bottom of
lower arm brackets.
Z stand adapters
Deluxe Keyboard Tier
To Next Page
Need help?
General
