EasyManua.ls Logo

on MICROWAVE 10 - Safety Instructions; Electrical Conducts; Technical Conducts; Operational Conducts

on MICROWAVE 10
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
4
Electrical conducts:
´ To reduce the risk of electric shock, do not
remove cover. No user serviceable parts
inside. Refer servicing to qualified service
personnel.
´ Before you connect the appliance, ensure the
voltage rating on the type plate corresponds
to your mains voltage (type plate is located on
the back of the unit).
Technical conducts:
´ Repairs to electrical appliances should only
be performed by qualified personnel. Improper
repairs may place the user and/or equipment
at serious risk.
´ Do not operate this appliance with a damaged
plug or cord, after a malfunction or after being
dropped or damaged in any way.
´ If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified people in order to
avoid a hazard.
´ Do not push objects into any openings as
damage to the equipment and/or electric
shock may occur.
´ If abnormal noise, smell, smoke or any other
failure is discovered during operation, turn off
the product and unplug the power plug. Then
contact the service center for repair.
´ Do not remove the appliance from the mains
power supply by pulling the cord; pull the plug.
Operational conducts:
´ The appliance is not intended for use by
people (including children below 8 years)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for their
safety.
´ This product is not a toy. Never leave the
equipment within reach of children. Close
supervision is required when using this
Safety instructions