8
Install the glass tray:
1. Place the turntable ring
assembly (3) on top of the
turntable shaft (2).
2. Place the glass tray (4) on
top of the turntable ring
assembly (3).
3. Gently turn the glass tray
so the hub on the bottom
of the glass tray will hook
into
place with the turntable
shaft.
Use the controls:
1. Set the heating power by turning the
power knob (A) to a level between
Low (low) and High (high).
2. Set the heating time by turning the
timer knob (B) to 0-35 minutes.
Note: Adjust the defrost time by
following the weight of the food.
E.g. if the food weighs about 0.6 kg,
turn the timer knob to 0.6.
3. The microwave oven will
automatically begin to heat the food
when power and timer is set. The
microwave oven will signal when the heating is nished.
4. After heating, turn the time control to 0 and follow the
instructions in the paragraph “Maintenance” if the
microwave needs cleaning.
Operation
To Next Page
Loading...