Onan Elite E140V User Manual

IGNITION
Spark Plug
Refer to the Periodic Maintenance Schedule for the
spark plug service interval. Replace the spark plug
if it shows signs of fouling or electrode erosion.
Refer to
Specifications (Table 1) for the spark plug
gap.
Solid State Ignition
Ignition timing is set at the factory, and it is not
adjustable. The solid state ignition components do
not require any routine maintenance.
COOLING SYSTEM
Refer to the Periodic Maintenance Schedule for the
cooling system
service interval. Clean the cooling
fins sooner if required. Remove dust, dirt
or oil from
the cooling surfaces.
-1PIugged or cfogged inlet screens
and recoil starter can cause overheating and
engine damage. Remove chaff and debris from
air inlets.
EXHAUST SYSTEM
LaWAR"GIA hot exhaust system can cause
severe burns. Allow the engine time fo cool
down before Inspecting or servicing fhe ex-
hausf sysfem.
,J
Make regular visual and audible inspections of the
exhaust system. Locate leaks in the muffler and
piping while the engine is operating. Repair all leaks
immediately after they are detected for personal
safety. Keep the area around the muffler and ex-
haust manifold clear of chaff and debris.
1-1 Breathfng exhaust gas can result In
severe personal lnjufy or death. Inspect the
exhaust system audibly and visually for leaks
daily, and repalr leaks immediateiy.
[aWARNINGIAccumuIatlon of chaff and debrls
around the muffler can result in a potentlal ffre
hazard. Remove chaff and debris from around
exhaust system.
12

Onan Elite E140V Specifications

General

Brand	Onan
Model	Elite E140V
Category	Engine
Language	English