8 WWW.ONEFORALL.COM
Code Blink Out
After you have used the Search Method, you can find out which code
the ZAPPER responded to by blinking back the code. It’s handy to know
your Television code for future reference. Remember, you can only
blink back your code after the ZAPPER is operating your device.
To blink out your TV code:
1 Press and hold the MAGIC key until the POWER key
(LED) blinks twice (the POWER key (LED) will blink once
then twice).
2 Next, press Programme(-), Programme(-),
Programme(+).
3 For the first digit of your 5-digit code, press Volume + ( )
and count the red blinks.
4 For the second digit, press Volume - ( ) and count the
red blinks.
5 For the third digit, press Programme(+) and count the
red blinks.
6 For the fourth digit, press Programme(-) and count the
red blinks.
7 For the fifth digit, press MUTE and count the red blinks.
Write the codes for your TV in the boxes provided on page 6 and inside the
battery compartment for easy future reference.
To Next Page
Loading...
Need help?
General
