7
SETUP
SETUP BY CODE
If the brand of your device is not listed in the SimpleSet
feature, you can set up by trying codes individually. To do
this, rstly locate your brand in the Code List. Codes are listed
by brand and device, and in order of popularity.
1. Turn on your device (not on standby) and point the
Essence remote towards it.
2. Press the Device key you wish to set up
(for example TV)
3. Hold down the SETUP key until the LED
under the Device key blinks twice
4. Enter the rst 4 digit code listed for your
brand (e.g. 1840 for LG).
5. The LED will blink twice on the last digit of the code.
6. Now aim the remote towards your device
and press the POWER key.*
7. If the device turns o your remote is ready to use. If
not, repeat steps 2-6 with the next code in the list.
* Note: If your original remote did not have a Power key,
try testing with a dierent key at step 6. For example try
pressing Play or Pause when setting up a streaming box and
see if the box responds.
713368 Essence-4 CAN_Manual URC2140 RDN1011222 incl. Codelist_75x250.indd 7713368 Essence-4 CAN_Manual URC2140 RDN1011222 incl. Codelist_75x250.indd 701-12-2022 16:2001-12-2022 16:20
To Next Page
Loading...
Need help?
General
